|
Mr Heater MH18B Portable "Big Buddy" Heater | 
| Brand: Mr. Heater
Category: Kitchen
Department: Tools
List Price: $214.88
Buy New: $129.99
as of 9/4/2010 05:13 EDT details
You Save: $84.89 (40%)
New (27) from $129.99
Seller: Northern Tool & Equipment
Rating:  73 reviews
Sales Rank: 9612
Color: GRAY/RED
Autographed: No
Memorabilia: No
Number Of Items: 1
Batteries: 4
Batteries Included: No
Shipping Weight (lbs): 18.5
Dimensions (in): 13 x 20 x 19
MPN: F274800
Model: F274800
UPC: 089301748002
EAN: 0089301748255
ASIN: B0002WRHE8
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Low, medium, and high heat level control knob for steady temperatures | | • | Key-shaped rear mounting holes for wall mounting | | • | Large four-position heat level control knob for controlling with gloved hands | | • | Built-in Piezo starter for easy starts | | • | Battery or A/C powered blower fan for versatility |
|
| View Collection:
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
Heater is NEW, improved, totally portable, get more POWERFUL heat! The Mr. Heater Big Buddy Propane Heater, now with TWICE the BTU output of the previous model, and with more propane capacity! Heater has wo 1-lb. propane cylinders offer from 3-12 hours of heating. Two 20-lb. cylinders heat up to 400 sq. ft. for up to 220 hrs. (propane cylinders and tanks not included. Hoses sold below); 3 Heater settings... 4,000/9,000/18,000 BTU / hr.; Powerful blower fan uses AC plug-in (adapter not included) or D batteries. Or just use unit as a radiant heater; CSA-certified safe, with unique low-oxygen sensor and tip-over automatic shut-off; Effortless built-in piezo electric starter; Durable porcelain-coated reflector, wire safety guard; Propane heater measures 17 x 10 x 17 1/2", approx. 15 lbs. "Key" rear holes for wall mounting. Shiver no more...get yours today! Mr. Heater Big Buddy Propane Heater
|
| Customer Reviews:
Showing reviews 1-5 of 73
 UNABLE TO GET PARTS August 13, 2010
M. Murdock (OREGON COAST)
1 out of 1 found this review helpful
THE QUICK DISCONNECT INSIDE MY HEATER STARTED LEAKING. MR HEATER WILL NOT SELL THIS PART. THEY SAID THEY "DON'T WANT THIS PART USED ON OTHER BRAND HEATERS". WHAT A JOKE !!! DO NOT BUY MR HEATER PRODUCTS..I BOUGHT THE PROCOM MD100TBA HEATER ON LINE AT ACE HARDWARE FOR $132.95. FREE SHIPPING. IT HAS A THERMOSTAT AND TURNS ON AND OFF. WORKS A LOT BETTER THAN THE BIG BUDDY. MUCH BETTER PRODUCT THAN THE BUDDY HEATERS !!
 Outdoorsman / Professonal June 5, 2010
Greg Dillon (Vancouver, Washington United States)
The best and most effecient heater that I've ever used. The added little feature of having a blower fan really adds a nice overall touch to the heater. I borrowed the smaller version from a friend and decided to go with the larger unit. I'm very pleased with my purchase and would recommend it to anyone!!
Big Buddy March 8, 2010
Joe Burns (TN USA)
Great little heater! This thing puts out a lot of heat. I bought it for a backup when the power goes out but I've been using it a lot just to knock the chill off. I keep the heat pump set pretty low which is fine when I'm up moving about but when I sit down to read or watch tv it is a little cool. I fire this thing up for a little while to warm the room and I don't have to turn the heat pump up and heat up the whole house. I also bought one for my cabin.
Not the best price February 10, 2010
Clarence A. Forti
0 out of 1 found this review helpful
I would like to buy this but Cabellas has it for $119, I don't live close to there but would be worth the trip
 Not bad, but need to work on assembly quality February 7, 2010
C. Parsons
1 out of 2 found this review helpful
I bought this unit to heat my 480 sq/ft insulated garage with 10ft ceilings so that I could work on my car during the winter. Technically the unit might be a little undersized for such a space, but then again I'm not looking for 70 degrees, just to get it bearable. I bought the unit with the quick connect low pressure hose to connect to a 20lb LP tank.
Setting up the unit is very easy, especially with the quick connect. It takes a minute or two to purge the air out of the lines, after that the ignition should be able to light the pilot, which it did. Unfortunately, despite holding the pilot down for over a minute to make sure the thermocouple was up to temperature, the pilot would immediately go out. I figured the thermocouple was working, so by process of elimination I determined that the tilt switch was either bad or disconnected.
To get to the tilt switch you have to completely disassemble the unit. Start by removing the 4 screws from the back cover, push the cover straight up to disconnect the hooks at the top and then pop it off. Remove the 3 screws securing the back of the handle. Remove the screw holding the handle to the left side piece (looking from the back), remove the left screw holding the metal face, remove the left screw holding the 2 plastic pieces together, remove the left screw holding the bottom of the metal face to the plastic side. The side piece will them rotate off from back to front. From there you should have clear access to the tilt switch, which I could immediately see was disconnected. An attempt had been made to hold it with silicon from the factory, but the silicon was not correctly applied or not given time to set. Reconnected the switch and did a test lighting in the partially disassembled state and all was good. Shut the unit off before it gets warm and reassemble.
Now that my unit was actually working I could fire it up and put it to the test. It throws off a good amount of radiant heat on high, you don't want to stand too close for too long. It got my garage that was around 40 degrees up to around 60 degrees in about an hour on a 25 degree day. I'm happy with that performance. I'm running the fan with batteries for now, but will probably get an AC adapter.
Showing reviews 1-5 of 73
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
| |
